An overmodulation method for torque balance in in-wheel motor systems with a dual-PMSM coupled to a single shaft

Abstract

An overmodulation method is proposed for an in-wheel system where two motors are coupled to a sum gear. In the dual-motor dual-inverter single shaft systems, the output voltage magnitudes of two inverters are not the same in the overmodulation range due to the angle offset between two motors. In this paper, to maintain torque balance in the overmodulation region, holding vectors are defined between adjacent vertices of two voltage hexagons. Around these vectors, the holding region is also defined by the holding angle. If a reference voltage vector is in the holding region, it is modulated to the holding vector. Otherwise, it is modulated to the vector on the arc of inscribed circle. For a given the modulation index (MI), the holding angle is obtained based on the Fourier series expansion. The proposed method keeps the output voltages of two inverters the same even if two motors have the angle offset. Further, it has the characteristic of maintaining the linearity between the reference and output MI to the maximum MI. The proposed overmodulation method is demonstrated by simulation and experimental results. ? 2021 IEEE.