On the Selection of the Optimal Intercritical Annealing Temperature for Medium Mn TRIP Steel

Abstract

A model is proposed to predict the room temperature austenite volume fraction as a function of the intercritical annealing temperature for medium Mn transformation-induced plasticity steel. The model takes into account the influence of the austenite composition on the martensite transformation kinetics and the influence of the intercritical annealing temperature dependence of the austenite grain size on the martensite start temperature. A maximum room temperature austenite volume fraction was obtained at a specific intercritical annealing temperature T (M). Ultrafine-grained ferrite and austenite were observed in samples intercritically annealed below the T (M) temperature. The microstructure contained a large volume fraction of athermal martensite in samples annealed at an intercritical temperature higher than the T (M) temperature.