DC Field | Value | Language |
---|---|---|
dc.contributor.author | Euh, K | - |
dc.contributor.author | Lee, S | - |
dc.date.accessioned | 2015-06-25T02:42:15Z | - |
dc.date.available | 2015-06-25T02:42:15Z | - |
dc.date.created | 2009-08-24 | - |
dc.date.issued | 2003-01 | - |
dc.identifier.issn | 1073-5623 | - |
dc.identifier.other | 2015-OAK-0000003097 | en_US |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/11473 | - |
dc.description.abstract | Correlation of microstructure with hardness and wear resistance of VC/carbon steel surface-alloyed materials fabricated by high-energy electron-beam irradiation was investigated. The mixtures of VC powders and flux (50 pct MgO-50 pct CaO or CaF2) were deposited on a plain carbon steel substrate, and subsequently irradiated using a high-energy electron beam. The surface-alloyed layers of 1.2 to 3 mm in thickness were homogeneously formed without defects, and contained a large amount (about 10 vol pct) of VC precipitates in the bainitic or martensitic matrix. This microstructural modification including the formation of hard precipitates and hardened matrix in the surface-alloyed layers improved hardness and wear resistance. Particularly in the surface-alloyed material fabricated with the lower input energy density, the wear resistance was greatly enhanced over the steel substrate because of the increased size and volume fraction of VC particles, although the thickness of the surface-alloyed layer decreased. Microstructural modifications including melting, solidification, precipitation, and phase transformation of the surface-alloyed layer were also predicted from a thermal transfer modeling and a Fe-V C ternary phase diagram. The predicted results were found consistent with those data from actual electron-beam irradiation and microstructural analysis. | - |
dc.description.statementofresponsibility | open | en_US |
dc.language | English | - |
dc.publisher | MINERALS METALS MATERIALS SOC | - |
dc.relation.isPartOf | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | - |
dc.rights | BY_NC_ND | en_US |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/2.0/kr | en_US |
dc.title | Correlation of microstructure with hardness and wear resistance of VC/steel surface-alloyed materials fabricated by high-energy electron-beam irradiation | - |
dc.type | Article | - |
dc.contributor.college | 신소재공학과 | en_US |
dc.identifier.doi | 10.1007/s11661-003-0208-8 | - |
dc.author.google | Euh, K | en_US |
dc.author.google | Lee, S | en_US |
dc.relation.volume | 34 | en_US |
dc.relation.issue | 1 | en_US |
dc.relation.startpage | 59 | en_US |
dc.relation.lastpage | 69 | en_US |
dc.contributor.id | 10052220 | en_US |
dc.relation.journal | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | en_US |
dc.relation.index | SCI급, SCOPUS 등재논문 | en_US |
dc.relation.sci | SCI | en_US |
dc.collections.name | Journal Papers | en_US |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.34, no.1, pp.59 - 69 | - |
dc.identifier.wosid | 000180120700006 | - |
dc.date.tcdate | 2019-01-01 | - |
dc.citation.endPage | 69 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 59 | - |
dc.citation.title | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | - |
dc.citation.volume | 34 | - |
dc.contributor.affiliatedAuthor | Lee, S | - |
dc.identifier.scopusid | 2-s2.0-0037272243 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 12 | - |
dc.type.docType | Article | - |
dc.subject.keywordPlus | SPEED STEEL ROLL | - |
dc.subject.keywordPlus | IMPROVEMENT | - |
dc.subject.keywordPlus | LAYERS | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.