Open Access System for Information Sharing

Login Library

 

Thesis
Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads
Full metadata record
Files in This Item:
There are no files associated with this item.
DC FieldValueLanguage
dc.contributor.author지형준en_US
dc.date.accessioned2014-12-01T11:47:26Z-
dc.date.available2014-12-01T11:47:26Z-
dc.date.issued2011en_US
dc.identifier.otherOAK-2014-00678en_US
dc.identifier.urihttp://postech.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000001094121en_US
dc.identifier.urihttps://oasis.postech.ac.kr/handle/2014.oak/1180-
dc.descriptionDoctoren_US
dc.description.abstractIn this thesis, a 3.8Gbps DRAM interface and a 2Gbps LCD intra-panel interface are proposed.Firstly, a 3.8Gbps 2-drop single-ended integrating DFE (IDFE) receiver is implemented in a 0.18um CMOS by using a single-loop LMS-algorithm to find the DFEcoefficients automatically. Initially, a preamble input data pattern (‘1101’) is applied to the main IDFE circuit to determine the DFE coefficients, while a fixed input data pattern (‘1111’) is applied to the replica IDFE circuit. The difference between the outputs of the two IDFE circuits is used in the feedback loop to determine the DFE coefficients. The reference voltage (Vref) of preamplifier is generated inside chip by a Vref loop to reduce the effect of the external noise and the input offset voltage of preamplifier and IDFE circuits and also to track the mid-level of the input data swing independent of PVTvariations. An integrating deskew scheme with a minimum overhead is introduced. 2-drop and 4-drop DRAM channels are tested. The maximum data rate was increased from1.0Gbps to 2.6Gbps by DFE in the heavily loaded 4-drop interface, from 3.5Gbps to 3.8Gbps by DFE in the 2-drop interface.Secondly, a clock-cascaded point-to-point intra-panel interface for TFT-LCD is designed to simplify data protocol with high data efficiency. The clock frequency is lowerthan the data rate by sub-pixel bits and the transition time is maximized to reduce harmonics. To simplify the data protocol, the VSYNC is embedded in the clock andcascaded DLLs are used. A simple coarse control scheme is proposed to solve the initial delay problem of DLL and compensate any timing skew between data and clock. Testchip was fabricated in a 0.18um CMOS process. A 2Gbps data transmission was achieved through the FFC length of 100cm and a 50cm FR4 PCB with a 1-tap TX de-emphasis(coefficient 0.4, clock rise time 1.04ns). Image test was performed with 42inch Full HD 120Hz Panel (data rate ~ 1.5Gbps) by using proposed interface and confirmed a correct operation of the proposed protocol.en_US
dc.languageengen_US
dc.publisher포항공과대학교en_US
dc.rightsBY_NC_NDen_US
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/2.0/kren_US
dc.titleA 3.8Gbps DRAM DFE-Receiver Circuit with a Single-Loop SS-LMS Algorithm and a 2Gbps LCD Intra-Panel interface circuit with VSYNC-Embedded Clocken_US
dc.typeThesisen_US
dc.contributor.college일반대학원 전자컴퓨터공학부en_US
dc.date.degree2011- 8en_US
dc.type.docTypeThesis-

qr_code

  • mendeley

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

Views & Downloads

Browse