DC Field | Value | Language |
---|---|---|
dc.contributor.author | Hatchwell, C | - |
dc.contributor.author | Sammes, NM | - |
dc.contributor.author | Brown, IWM | - |
dc.date.accessioned | 2016-03-31T08:25:58Z | - |
dc.date.available | 2016-03-31T08:25:58Z | - |
dc.date.created | 2013-11-08 | - |
dc.date.issued | 1999-11 | - |
dc.identifier.issn | 0167-2738 | - |
dc.identifier.other | 1999-OAK-0000028192 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/15292 | - |
dc.description.abstract | A general procedure for the extrusion of Ce0.8Gd0.2O1.9 tubular electrolytes is detailed. Using a commercial water-based binder system, Ce0.8Gd0.2O1.9 was extruded, then fired at 1600 degrees C to form high-density electrolyte tubes (98% relative to theoretical). Heat-treatment of the Ce0.8Gd0.2O1.9 powder at 900 degrees C for 4 h yielded tubes that were highly dense with a smooth surface finish, while non heat-treated powders resulted in an extrusion that was less dense with poor surface finish. Electrodes were applied and the tubular SOFC was electrically tested. A good open circuit voltage of 0.911 V was achieved for the cell, however a poor operating current density of 0.0123 A/cm(2) at 0.7 V was obtained. The results demonstrate the potential of fabricating and operating tubular SOFCs. (C) 1999 Elsevier Science B.V. All rights reserved. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | Elsevier | - |
dc.relation.isPartOf | SOLID STATE IONICS | - |
dc.subject | cerium oxide | - |
dc.subject | ceria | - |
dc.subject | extrusion | - |
dc.subject | solid oxide fuel cell | - |
dc.subject | SOFC | - |
dc.title | Fabrication and Properties of Ce0.8Gd0.2O1.9 Electrolyte Based Tubular Solid Oxide Fuel Cells | - |
dc.type | Article | - |
dc.contributor.college | 첨단원자력공학부 | - |
dc.identifier.doi | 10.1016/S0167-2738(99)00232-5 | - |
dc.author.google | Hatchwell, C | - |
dc.author.google | Sammes, NM | - |
dc.author.google | Brown, IWM | - |
dc.relation.volume | 126 | - |
dc.relation.issue | 3-4 | - |
dc.relation.startpage | 201 | - |
dc.relation.lastpage | 208 | - |
dc.contributor.id | 10978306 | - |
dc.relation.journal | SOLID STATE IONICS | - |
dc.relation.index | SCI급, SCOPUS 등재논문 | - |
dc.relation.sci | SCI | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | SOLID STATE IONICS, v.126, no.3-4, pp.201 - 208 | - |
dc.identifier.wosid | 000083750200001 | - |
dc.date.tcdate | 2019-01-01 | - |
dc.citation.endPage | 208 | - |
dc.citation.number | 3-4 | - |
dc.citation.startPage | 201 | - |
dc.citation.title | SOLID STATE IONICS | - |
dc.citation.volume | 126 | - |
dc.contributor.affiliatedAuthor | Sammes, NM | - |
dc.identifier.scopusid | 2-s2.0-0033357771 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 41 | - |
dc.description.scptc | 37 | * |
dc.date.scptcdate | 2018-05-121 | * |
dc.type.docType | Article | - |
dc.subject.keywordAuthor | cerium oxide | - |
dc.subject.keywordAuthor | ceria | - |
dc.subject.keywordAuthor | extrusion | - |
dc.subject.keywordAuthor | solid oxide fuel cell | - |
dc.relation.journalWebOfScienceCategory | Chemistry, Physical | - |
dc.relation.journalWebOfScienceCategory | Physics, Condensed Matter | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Chemistry | - |
dc.relation.journalResearchArea | Physics | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.