Effects of Lubricant and Temperature on Friction Coefficient during Hot Forging of Nimonic 115 Superalloy
SCIE
SCOPUS
- Title
- Effects of Lubricant and Temperature on Friction Coefficient during Hot Forging of Nimonic 115 Superalloy
- Authors
- Shahriari, D; Sadeghi, MH; Ebrahimi, GR; Kim, KT
- Date Issued
- 2011-05
- Publisher
- REDAKCIA KOVOVE MATERIALY
- Abstract
- In this paper, the effects of friction and temperature on Nimonic 115 superalloy are presented during hot forging. Various contact conditions were applied including dry contact and lubricated conditions using graphite, glass and mica sheets in hot ring compression and hot compression processes. The FEM simulations were carried out to derive friction factors during hot ring compression test. An upper bound method was employed to calculate friction factor during hot compression. The microstructures of samples were also examined after hot compression tests from optical microscopic observations. The partial and full dynamic recrystallization was observed at 1100 degrees C and 1175 degrees C, respectively. It was found that a mica sheet was useful for hot forging of Nimonic 115. Its friction coefficient was found by two different methods to be approximately 0.3.
- Keywords
- nickel base superalloy; Nimonic 115; hot compression; hot ring compression; friction coefficient; lubricant; upper bound method; dynamic recrystallization; necklace structure; NICKEL-BASE SUPERALLOY; RING COMPRESSION; DEFORMATION
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/16549
- DOI
- 10.4149/KM_2011_5_375
- ISSN
- 0023-432X
- Article Type
- Article
- Citation
- KOVOVE MATERIALY-METALLIC MATERIALS, vol. 49, no. 5, page. 375 - 383, 2011-05
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.