Work hardening behavior of ultrafine grained Mn transformation induced plasticity steel

Abstract

Ultrafine grain refinement by intercritical annealing at 680 degrees C and 640 degrees C was investigated in a Fe-0.05%C-6.15%Mn-1.4%Si multiphase TRIP steel. A large volume fraction of retained austenite was obtained at room temperature in both cases. Whereas a pronounced localization of the deformation during tensile testing appeared in the steel annealed at 640 degrees C, strain localization occurred only in the initial deformation stages in the steel annealed at 680 degrees C. The retained austenite was transformed to strain-induced martensite during tensile testing in the sample annealed at 680 degrees C. However, no martensitic transformation was observed in the sample annealed at 640 degrees C. The activation volume showed a sharp decrease during the tensile test and saturated to the same value in both cases. Two different dislocation structures were observed in the ferrite grains of the samples annealed intercritically at 680 degrees C after tensile deformation, but only the dislocation-free structure of ferrite was observed in the sample annealed at 640 degrees C. (C) 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.