DC Field | Value | Language |
---|---|---|
dc.contributor.author | Das, S | - |
dc.contributor.author | Lim, NS | - |
dc.contributor.author | Kim, HW | - |
dc.contributor.author | Park, CG | - |
dc.date.accessioned | 2016-03-31T09:27:09Z | - |
dc.date.available | 2016-03-31T09:27:09Z | - |
dc.date.created | 2011-08-12 | - |
dc.date.issued | 2011-09 | - |
dc.identifier.issn | 0261-3069 | - |
dc.identifier.other | 2011-OAK-0000024020 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/17204 | - |
dc.description.abstract | In the present investigation the microstructure and age-hardening behaviour of Al-Mg-Si alloy prepared by twin roll casting (TRC), varying rolling speed (i.e., 3, 4, and 5 rpm), were studied. The as-cast samples were subjected to optical microscopy (OM) to understand the effect of rolling speed on the alloy microstructure. Significant difference in grain size and shape was observed for all the alloys in as-cast condition. The as-cast samples were solutionized at 540 degrees C for 2 h followed by isothermal heating at 180 degrees C for different time intervals. Thereafter, the as-cast and solutionized samples were subjected to scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS). Segregation of solute atoms at grain boundaries were observed for both as-cast as well as solutionized samples. Age-hardening results show that time to attain peak hardness decreases for the alloy produced by higher rolling speed. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.relation.isPartOf | MATERIALS & DESIGN | - |
dc.subject | MECHANICAL-PROPERTIES | - |
dc.subject | ALUMINUM-ALLOYS | - |
dc.subject | HEAT | - |
dc.subject | RESISTANCE | - |
dc.subject | IMPROVE | - |
dc.subject | SHEET | - |
dc.title | Effect of rolling speed on microstructure and age-hardening behaviour of Al-Mg-Si alloy produced by twin roll casting process | - |
dc.type | Article | - |
dc.contributor.college | 신소재공학과 | - |
dc.identifier.doi | 10.1016/J.MATDES.2011.03.057 | - |
dc.author.google | Das, S | - |
dc.author.google | Lim, NS | - |
dc.author.google | Kim, HW | - |
dc.author.google | Park, CG | - |
dc.relation.volume | 32 | - |
dc.relation.issue | 8 | - |
dc.relation.startpage | 4603 | - |
dc.relation.lastpage | 4607 | - |
dc.contributor.id | 10069857 | - |
dc.relation.journal | MATERIALS & DESIGN | - |
dc.relation.index | SCI급, SCOPUS 등재논문 | - |
dc.relation.sci | SCIE | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | MATERIALS & DESIGN, v.32, no.8, pp.4603 - 4607 | - |
dc.identifier.wosid | 000292621000063 | - |
dc.date.tcdate | 2019-01-01 | - |
dc.citation.endPage | 4607 | - |
dc.citation.number | 8 | - |
dc.citation.startPage | 4603 | - |
dc.citation.title | MATERIALS & DESIGN | - |
dc.citation.volume | 32 | - |
dc.contributor.affiliatedAuthor | Park, CG | - |
dc.identifier.scopusid | 2-s2.0-79957858233 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 9 | - |
dc.description.scptc | 12 | * |
dc.date.scptcdate | 2018-05-121 | * |
dc.type.docType | Article | - |
dc.subject.keywordPlus | MECHANICAL-PROPERTIES | - |
dc.subject.keywordPlus | ALUMINUM-ALLOYS | - |
dc.subject.keywordPlus | HEAT | - |
dc.subject.keywordPlus | RESISTANCE | - |
dc.subject.keywordPlus | IMPROVE | - |
dc.subject.keywordPlus | SHEET | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.