Biokinetic evaluation and modeling of continuous thiocyanate biodegradation by Klebsiella sp.

Abstract

Biokinetics for autotrophic degradation of thiocyanate using batch culture of Klebsiella sp. were evaluated both analytically and numerically. A sequential approach with an analytical method followed by a numerical approximation was used to evaluate and to ensure the accuracy of the parameter estimation. The nonlinear least-squares method with a 95% confidence interval was employed. The growth conditions were maintained at pH 7 and 38 degreesC for all experiments. With an automated incubation and turbidity reader, a total of 16 different initial thiocyanate concentrations, ranging from 10 to 300 mg L-1, were used to develop a kinetic expression of specific growth rate as a function of substrate concentration. The biodegradation of thiocyanate with Klebsiella sp. followed a substrate inhibition pattern. Three identical automated bioreactors with working volumes of 1.5 L, equipped with sterilizable sampling ports, were also used for the numerical approximation of the biokinetic parameters in batch mode. A fourth order Runge-Kutta method was used to approximate the substrate inhibition kinetics of the Klebsiella sp. utilizing thiocyanate. Although the kinetic coefficients estimated by analytical and numerical methods were not statistically different at a 0.05 alpha level, model responses of numerical approximation generated a better prediction of changes in thiocyanate and cell mass concentrations. The hypothetical maximum growth rate, mu(m) half saturation coefficient, K-s, microbial yield coefficient, Y, cell mass decay rate coefficient, k(d), and substrate inhibition coefficient, K-si, were evaluated as being 0.62 +/- 0.05 d(-1), 85 +/- 8 mg SCN- L-1, 0.076 +/- 0.011 mg cell mass (mg SCN)(-1), 0.03 +/- 0.002 d(-1), and 131 +/- 22 mg SCN- L-1, respectively. The calculated maximal substrate concentration, S-m and apparent maximum specific growth rate, mu'(m), were 105.5 +/- 8.7 mg SCN- L-1 and 0.24 +/- 0.01 d(-1), respectively. Using these estimated parameters, the theoretical performance of the continuous operation was also illustrated, which depicts the residual thiocyanate and Klebsiella sp. concentrations in the non-steady and steady states at different hydraulic retention times (HRTs). Assuming the influent concentration of 250 mg SCN- L-1, the expected treatment efficiency ranged from 94.9% to 69.4% between 20 and 5 days HRT, respectively. Klebsiella sp. was expected to be washed out at 4.8 days HRT, thus resulting in no treatment of thiocyanate.