DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, DG | - |
dc.contributor.author | Lee, S | - |
dc.contributor.author | Lee, CS | - |
dc.date.accessioned | 2016-03-31T12:38:24Z | - |
dc.date.available | 2016-03-31T12:38:24Z | - |
dc.date.created | 2009-08-24 | - |
dc.date.issued | 2004-02-05 | - |
dc.identifier.issn | 0921-5093 | - |
dc.identifier.other | 2004-OAK-0000003968 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/18134 | - |
dc.description.abstract | Widmanstatten and equiaxed microstructures containing very fine alpha(2) particles were obtained by aging a Ti-6Al-4V alloy, and their quasi-static and dynamic deformation behavior was investigated in comparison to that of unaged microstructures. Quasi-static and dynamic torsional tests were conducted on them using a torsional Kolsky bar, and torsionally deformed areas beneath fracture surfaces were observed to investigate various microstructural factors determining the deformation behavior and effects of alpha(2) precipitation. The dynamic torsional test results indicated that maximum shear stress and fracture shear strain of the aged Widmanstatten and equiaxed microstructures were higher than those of the unaged microstructures. The number of voids initiated in the aged Widmanstatten and equiaxed microstructures was five times greater than those in unaged microstructures because of the alpha(2) precipitation. This indicated that the aging treatment had a homogenizing effect, i.e., less likelihood of developing a region of concentrated strain that preceded the adiabatic shear band formation, thereby reducing the possibility of the adiabatic shear band formation. Fine alpha(2) precipitation by aging was effective in the improvement of quasi-static and dynamic torsional properties and in the reduction of the adiabatic shear banding, which provided a new idea to improve ballistic performance of Ti alloy armor plates. (C) 2003 Elsevier B.V. All rights reserved. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCIENCE SA | - |
dc.relation.isPartOf | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.subject | dynamic deformation behavior | - |
dc.subject | Ti-6Al-4V alloy | - |
dc.subject | alpha(2)-Ti3Al precipitate | - |
dc.subject | Widmanstatten microstructure | - |
dc.subject | equiaxed microstructure | - |
dc.subject | dynamic torsional test | - |
dc.subject | adiabatic shear band | - |
dc.subject | SHEAR BAND FORMATION | - |
dc.subject | HIGH-STRAIN RATES | - |
dc.subject | MECHANICAL-PROPERTIES | - |
dc.subject | ADIABATIC SHEAR | - |
dc.subject | TI-6AL-4V ALLOY | - |
dc.subject | TITANIUM-ALLOYS | - |
dc.subject | FRACTURE | - |
dc.subject | MICROSTRUCTURE | - |
dc.subject | TEMPERATURE | - |
dc.subject | MORPHOLOGY | - |
dc.title | Quasi-static and dynamic deformation behavior of Ti-6A1-4V alloy containing fine alpha(2)-Ti3Al precipitates | - |
dc.type | Article | - |
dc.contributor.college | 신소재공학과 | - |
dc.identifier.doi | 10.1016/j.msea.2003.08.061 | - |
dc.author.google | Lee, DG | - |
dc.author.google | Lee, S | - |
dc.author.google | Lee, CS | - |
dc.relation.volume | 366 | - |
dc.relation.issue | 1 | - |
dc.relation.startpage | 25 | - |
dc.relation.lastpage | 37 | - |
dc.contributor.id | 10071833 | - |
dc.relation.journal | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.relation.index | SCI급, SCOPUS 등재논문 | - |
dc.relation.sci | SCI | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.366, no.1, pp.25 - 37 | - |
dc.identifier.wosid | 000188216000005 | - |
dc.date.tcdate | 2019-01-01 | - |
dc.citation.endPage | 37 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 25 | - |
dc.citation.title | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | - |
dc.citation.volume | 366 | - |
dc.contributor.affiliatedAuthor | Lee, S | - |
dc.contributor.affiliatedAuthor | Lee, CS | - |
dc.identifier.scopusid | 2-s2.0-0347477255 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 40 | - |
dc.type.docType | Article | - |
dc.subject.keywordPlus | SHEAR BAND FORMATION | - |
dc.subject.keywordPlus | HIGH-STRAIN RATES | - |
dc.subject.keywordPlus | MECHANICAL-PROPERTIES | - |
dc.subject.keywordPlus | ADIABATIC SHEAR | - |
dc.subject.keywordPlus | TI-6AL-4V ALLOY | - |
dc.subject.keywordPlus | TITANIUM-ALLOYS | - |
dc.subject.keywordPlus | FRACTURE | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | MORPHOLOGY | - |
dc.subject.keywordAuthor | dynamic deformation behavior | - |
dc.subject.keywordAuthor | Ti-6Al-4V alloy | - |
dc.subject.keywordAuthor | alpha(2)-Ti3Al precipitate | - |
dc.subject.keywordAuthor | Widmanstatten microstructure | - |
dc.subject.keywordAuthor | equiaxed microstructure | - |
dc.subject.keywordAuthor | dynamic torsional test | - |
dc.subject.keywordAuthor | adiabatic shear band | - |
dc.relation.journalWebOfScienceCategory | Nanoscience & Nanotechnology | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Science & Technology - Other Topics | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.