Defecting tool wear in face milling with different workpiece materials
SCIE
SCOPUS
- Title
- Defecting tool wear in face milling with different workpiece materials
- Authors
- Cho, DW; Choi, WC; Lee, HY
- Date Issued
- 2000-01
- Publisher
- TRANS TECH PUBLICATIONS LTD
- Abstract
- This paper proposes a neural network for the decision-making system for monitoring tool wear while working materials such as Al6061, SB41, SM45C. The raw cutting forces signals are filtered and processed with adaptive AR modeling. The AR parameters and cutting conditions are used as input to the neural network along with the frequency band energy. The experimental results show that each neural network trained for each specified material can recognize tool wear with a more than 85% detection rate. When the normalized tensile strength of each material is used as additional input to the unified neural network, the network still has a success rate higher than 80%.
- Keywords
- face milling; neural network; tool wear; workpiece material; NEURAL-NETWORK
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/19780
- DOI
- 10.4028/www.scientific.net/KEM.183-187.559
- ISSN
- 1013-9826
- Article Type
- Article
- Citation
- KEY ENGINEERING MATERIALS, vol. 183-1, page. 559 - 564, 2000-01
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.