Leakage-current characteristics of sol-gel-derived Ba1-xSrxTiO3 (BST) thin films
SCIE
SCOPUS
- Title
- Leakage-current characteristics of sol-gel-derived Ba1-xSrxTiO3 (BST) thin films
- Authors
- Jang, SI; Jang, HM
- Date Issued
- 2000-01
- Publisher
- ELSEVIER SCI LTD
- Abstract
- Thin films of Ba0.5Sr0.5TiO3 (BST) were fabricated on RuO2/Ru/SiO2/Si substrates by spin coating multicomponent sol prepared using metal alkoxides. To analyze the surface effect of the dielectric film on the leakage current characteristics required for DRAM applications, post-annealing was carried out under O-2 or Ar atmosphere. Based on AES and RES data, we have concluded that doubly ionized oxygen vacancies are readily generated on the outermost surface of the BST thin film post-annealed under Ar atmosphere. The leakage current densities of the BST thin film post-annealed with O-2 and with Ar gases are approximately 1x10(-6) A/cm(2) and 4.6 x 10(-6) A/cm(2) at IV, respectively. This observation was interpreted in terms of( i) the increase in the tunneling current caused by the decrease in the depletion width at the surface region under Ar atmosphere and (ii) the effect from the bottom electrode under oxidative environment. (C) 2000 Elsevier Science Ltd and Techna S.r.l. All rights reserved.
- Keywords
- leakage current; sol-gel derived; Ba1-xSrxTiO3; thin films; ELECTRICAL-PROPERTIES; IMPROVEMENT
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/20020
- DOI
- 10.1016/S0272-8842(99)00073-5
- ISSN
- 0272-8842
- Article Type
- Article
- Citation
- CERAMICS INTERNATIONAL, vol. 26, no. 4, page. 421 - 425, 2000-01
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.