MHD stability analysis for advanced tokamak modes in the KSTAR device

Abstract

The Korea Superconducting Tokamak Advanced Research (KSTAR) device aims to demonstrating the steady-state operation of high-performance advanced tokamak (AT) modes. In order to meet this research goal it is critical to have a good magnetohydrodynamic (MHD) stability, so that KSTAR adopted a strong plasma shape and a conducting wall close to plasma for such stability. An early calculation during the KSTAR design phase had shown that a target AT mode stable up to beta(N) above 5 can be then obtained. A recent work by Katsuro-Hopkins et al. [O. Katsuro-Hopkins, S.A. Sabbagh, J.M. Bialek, H.K. Park, J.G. Bak, J. Chung, et al., Equilibrium and global MHD stability study of KSTAR high beta plasmas under passive and active mode control, Nucl. Fusion 50(2010) 025019] showed, however, that the maximum beta(N) value can be substantially lower than 5, unlike the earlier result. In this work, we present a more detailed study on the MHD stability limit of the KSTAR target AT mode and try to clarify the discrepancy observed in the previous two works. It is shown that in the reverse-shear plasma the target mode with beta(N) above 5 can be obtained if the pressure profile is relatively peaked, but the maximum beta(N) value is substantially reduced below 5 if the pressure profile becomes broader. This result suggests the importance of a proper control of the pressure profile to get the high-beta AT mode in KSTAR. (C) 2010 Elsevier B.V. All rights reserved.