DC Field | Value | Language |
---|---|---|
dc.contributor.author | Hariharan, K | - |
dc.contributor.author | Nguyen, NT | - |
dc.contributor.author | Chakraborti, N | - |
dc.contributor.author | Lee, MG | - |
dc.contributor.author | Barlat, F | - |
dc.date.accessioned | 2016-04-01T07:38:12Z | - |
dc.date.available | 2016-04-01T07:38:12Z | - |
dc.date.created | 2015-02-04 | - |
dc.date.issued | 2014-12 | - |
dc.identifier.issn | 1611-3683 | - |
dc.identifier.other | 2015-OAK-0000031624 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/26716 | - |
dc.description.abstract | Formability of a tailor welded blank (TWB) is affected by the strength ratio of the base metals joined. In this paper, formability of TWB with very high strength ratio made by joining twinning-induced plasticity (TWIP) and low carbon steels is numerically studied using a limiting dome height test. The drawbead geometry at the weaker side is modified to increase the dome height. The design of drawbead is optimized by treating it as a multi-objective problem with maximum dome height and minimum weldline movement as objectives, which were constructed as metamodels through a genetic algorithms based approach. The necessary data for the metamodeling are generated by finite element (FE) simulation using the commercial solver, LS-DYNA (R). The multi-objective optimization is carried out using a predator-prey genetic algorithm. The Pareto front estimated using this evolutionary approach is validated using FE simulations and a good correlation is obtained. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | WILEY-V C H VERLAG GMBH | - |
dc.relation.isPartOf | STEEL RESEARCH INTERNATIONAL | - |
dc.title | Multi-Objective Genetic Algorithm to Optimize Variable Drawbead Geometry for Tailor Welded Blanks Made of Dissimilar Steels | - |
dc.type | Article | - |
dc.contributor.college | 철강대학원 | - |
dc.identifier.doi | 10.1002/SRIN.201300471 | - |
dc.author.google | Hariharan, K | - |
dc.author.google | Nguyen, NT | - |
dc.author.google | Chakraborti, N | - |
dc.author.google | Lee, MG | - |
dc.author.google | Barlat, F | - |
dc.relation.volume | 85 | - |
dc.relation.issue | 12 | - |
dc.relation.startpage | 1597 | - |
dc.relation.lastpage | 1607 | - |
dc.contributor.id | 10200290 | - |
dc.relation.journal | STEEL RESEARCH INTERNATIONAL | - |
dc.relation.sci | SCI | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | STEEL RESEARCH INTERNATIONAL, v.85, no.12, pp.1597 - 1607 | - |
dc.identifier.wosid | 000345832000003 | - |
dc.date.tcdate | 2019-02-01 | - |
dc.citation.endPage | 1607 | - |
dc.citation.number | 12 | - |
dc.citation.startPage | 1597 | - |
dc.citation.title | STEEL RESEARCH INTERNATIONAL | - |
dc.citation.volume | 85 | - |
dc.contributor.affiliatedAuthor | Barlat, F | - |
dc.identifier.scopusid | 2-s2.0-84904818028 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 16 | - |
dc.description.scptc | 16 | * |
dc.date.scptcdate | 2018-05-121 | * |
dc.type.docType | Article | - |
dc.subject.keywordPlus | SHEET-METAL FORMABILITY | - |
dc.subject.keywordPlus | NATURE-INSPIRED TOOL | - |
dc.subject.keywordPlus | MATERIALS SCIENCE | - |
dc.subject.keywordPlus | BLAST-FURNACE | - |
dc.subject.keywordPlus | AUTOMOTIVE APPLICATIONS | - |
dc.subject.keywordPlus | LINE MOVEMENTS | - |
dc.subject.keywordPlus | DUAL-PHASE | - |
dc.subject.keywordPlus | DESIGN | - |
dc.subject.keywordPlus | MODEL | - |
dc.subject.keywordPlus | PREDICTION | - |
dc.subject.keywordAuthor | TWB | - |
dc.subject.keywordAuthor | drawbead | - |
dc.subject.keywordAuthor | TWIP steel | - |
dc.subject.keywordAuthor | multi-objective optimization | - |
dc.subject.keywordAuthor | genetic algorithm | - |
dc.subject.keywordAuthor | neural net | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.