Effect of post annealing on the resistive switching of TiO2 thin film
SCIE
SCOPUS
- Title
- Effect of post annealing on the resistive switching of TiO2 thin film
- Authors
- Kim, WG; Rhee, SW
- Date Issued
- 2009-11
- Publisher
- ELSEVIER SCIENCE BV
- Abstract
- The effect of annealing on the resistive switching of 35-nm-thick TiO2 thin film deposited with magnetron sputtering system was studied. Pt and Ag were used as a top electrode (TE), and Pt was used as a bottom electrode (BE). For Pt/as-deposited TiO2/Pt structure, both unipolar (URS) and bipolar resistive switching (BRS) were observed depending on the current compliance level. For Pt/400 degrees C annealed TiO2/Pt structure, only BRS was observed regardless of the current compliance level. The increase in the work function of the TiO2 film after annealing lowers the potential barrier height and changes the electron transfer process which was also confirmed from Ag/as-deposited TiO2/Pt structure. Above 600 degrees C, the film becomes leaky with the increase in grain size and roughness and the resistive switching behavior was not observed. (C) 2009 Elsevier B.V. All rights reserved.
- Keywords
- ReRAM; TiO2; Resistive switching; MEMORY APPLICATIONS; TOP ELECTRODE; OXIDE FILMS
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/27640
- DOI
- 10.1016/J.MEE.2009.0
- ISSN
- 0167-9317
- Article Type
- Article
- Citation
- MICROELECTRONIC ENGINEERING, vol. 86, no. 11, page. 2153 - 2156, 2009-11
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.