Size and Strain Analysis of Deformation Microstructure in High-Nitrogen Austenitic Stainless Steels
SCIE
SCOPUS
- Title
- Size and Strain Analysis of Deformation Microstructure in High-Nitrogen Austenitic Stainless Steels
- Authors
- Tae Ho Lee; Eun Joo Shin; Heon Young Ha; Chang Seok Oh; Kim, S.-J.
- Date Issued
- 2010-05
- Publisher
- Trans Tech Publications
- Abstract
- Deformation microstructure of Fe-18Cr-10Mn alloys with different nitrogen content (0.39 and 0.69N) were investigated using neutron diffraction. The deformation mode changed from strain-induced martensitic transformation (SIMI) to deformation twinning (DT), as nitrogen content was increased. The measured neutron profiles of tensile-strained bulk samples were fitted by modified Thomson-Cox-Hasting profile-shape function and the Lorentzian and Gaussian integral breadths were calculated based on Rietveld refinement. With the calculated integral breadths, the mean-squared (MS) strain could be evaluated using the size and strain analysis of double-Voigt approach. Based on the analysis of peak shift of individual reflections, the stacking fault probability (SFP) was determined. Although the calculated SFP and MS strain varied with the degree of deformation, the ratio of MS strain to SFP remained constant for each alloys regardless of tensile strain, but increased with nitrogen content. As a result, it was found that the SFE increased with increasing nitrogen content. The nitrogen-induced transition of deformation microstructure was accounted for by the change in SFE, as reported in other fcc materials.
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/36771
- DOI
- 10.4028/WWW.SCIENTIFIC.NET/MSF.652.133
- ISSN
- 0255-5476
- Article Type
- Article
- Citation
- Materials Science Forum, vol. 652, page. 133 - 138, 2010-05
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.