DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박윤범 | en_US |
dc.date.accessioned | 2014-12-01T11:46:57Z | - |
dc.date.available | 2014-12-01T11:46:57Z | - |
dc.date.issued | 2011 | en_US |
dc.identifier.other | OAK-2014-00419 | en_US |
dc.identifier.uri | http://postech.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000000893562 | en_US |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/921 | - |
dc.description | Master | en_US |
dc.description.abstract | In this paper, we present finite element (FE) models of the analysis of 2D elastic-plastic deformation of steel. On-Line prediction model which calculate roll force of finishing mills was built based on the results of plane strain, elastic-plastic finite element process model. We proposed the hypothetical mode of rolling, because On-Line prediction model with front and back tension in hot strip rolling. On-Line model’s front and back tension is examined through comparison with predictions from a finite element process model over the various process conditions. | en_US |
dc.language | kor | en_US |
dc.publisher | 포항공과대학교 | en_US |
dc.rights | BY_NC_ND | en_US |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/2.0/kr | en_US |
dc.title | 유한요소법에 기초한 열연중 탄소성을 고려한 압하력 정밀 예측 온라인 모델 | en_US |
dc.title.alternative | FE-based On-Line Model for the prediction of Roll Force in Hot Strip Rolling | en_US |
dc.type | Thesis | en_US |
dc.contributor.college | 일반대학원 기계공학과 | en_US |
dc.date.degree | 2011- 2 | en_US |
dc.contributor.department | 포항공과대학교 대학원 기계공학과 | en_US |
dc.type.docType | Thesis | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.