Impedance model of helical resonator discharge
SCIE
SCOPUS
- Title
- Impedance model of helical resonator discharge
- Authors
- Park, JC; Kang, B
- Date Issued
- 1997-12
- Publisher
- IEEE-INST ELECTRICAL ELECTRONICS ENGI
- Abstract
- Modeling and measurement results of the RF input impedance of a helical resonator discharge are given. A simple microstrip transmission line model is used to extract an equivalent circuit of a helical resonator discharge. The transmission line model consists of a grounded cylinder for RF shielding, a helical copper coil for RF heating, and a high density plasma, Transmission line parameters for an experimental helical resonator discharge chamber are extracted, and the results are compared with the measured results. The measured transmission line parameters for the experimental reactor are the characteristic impedance of 200 Omega, the attenuation constant of 6 x 10(-3) Np/m, and the wave number of 0.36 rad/m, which have good agreement with the calculated values.
- Keywords
- helical resonator; high density plasma science; impedance model; RF discharge; PLASMA SOURCE; FREQUENCY
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/20895
- DOI
- 10.1109/27.650909
- ISSN
- 0093-3813
- Article Type
- Article
- Citation
- IEEE TRANSACTIONS ON PLASMA SCIENCE, vol. 25, no. 6, page. 1398 - 1405, 1997-12
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.